User Manual (updated 15th Sept'2018)
WARNING DO NOT USE THIS APPLIANCE NEAR BATH TUBS, SHOWERS, BASINS OR OTHER VESSELS CONTAINING WATER
a) WARNING DO NOT USE THIS APPLIANCE NEAR BATH TUBS, SHOWERS, BASINS OR OTHER VESSELS CONTAINING WATER
b) The appliance can be used by children from 8 years and above and person with reduced physical, sensory or mental capabilities or lack of experience and knowledge; if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
c) If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or similarly qualified persons in order to avoid a hazard.
d) Burn Hazard. Keep appliance out of reach from young children. Particularly during cool down;
e) Always Place the appliance with the stand, if any, on a heat-resistant, stable flat surface.
The Pro-iron Multi-styler is designed with the most advanced technology, aesthetic quality and high performance and is produced from the most modern electric components. It can only be used at home or in a salon environment and is very safe and easy to use.
2. Main Characteristics
a) Input Voltage: AC ~ 110-240V 50/60 Hz
b) Power: 50 W;
3. Safety Instructions
a) Read all instructions before using.
b) Ensure the cord is in perfect condition. If there is any damage to the cord the appliance must NOT be used until the cord is replaced.
c) Never take the appliance apart. There are no serviceable parts inside.
d) Before plugging in the device, check that voltage indicated on the rating label corresponds to the outlet voltage.
e) Do not leave the appliance unattended while it is operating or plugged in.
f) Do not cover the thermal metal plates with other things, and avoid damaging the components.
g) Do not place the thermal metal plates too close to a person’s skin when in use, it is dangerous.
h) Always keep the power supply cord away from the thermal metal plates.
i) Never use this appliance when it is damaged.
j) Do not use any extension cord with this appliance. This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
k) Warning: Do not use this appliance near water or with wet hands.
I) For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
m) When the appliance is used in a bathroom, unplug it after use, since the proximity of water presents a hazard even when the appliance is switched off.
4. Directions For Use
a) Cleanse hair with an appropriate shampoo and conditioner or treatment before using the device;
b) Hair should be at least 80 % dry and clean;
c) Check the supply voltage first before using it and then insert the plug.
d) Plug in the Pro-iron Multi-styler and place it in the up-right position on a smooth, dry, flat surface.
e) Turn on the device with pressing [ON/OFF], the display screen will light up and “160°C” will be shown (after 2-4 seconds it will then show 100°C and begin increasing) which means the device is heating up.
f) Starting lower layers and working your way to the top of the head, next to scalp, select a small section of hair (approx. 2 inches wide and ¼ inch deep) and clamp between the metal plates**. Maintaining some tension, slowly slide the tongs down the section of hair from roots to tips. Be careful to avoid touching your hands or scalp with the hot plates.
** We strongly recommend applying a thermal protection product to each section before applying any heat to protect the integrity and overall health of your hair.
g) Repeat process all over the head, allowing hair to cool before combing through.
h) Press [+] / [-] to set temperature. Press [+] to increase the temperature by 10°C increments, until it reaches the maximum 230°C; Press [-] to reduce the temperature by 10°C increments, until it goes to the minimum 120°C.
i) After being heated for 60 minutes without use, the light of screen will go out, and the device will stop working and be turned off automatically. Press [ON/OFF] again to turn it ON.
j) After using, press [ON/OFF] to turn off the device. Then the light on screen will go out which means the device is cooling down.
k) When the device has completely cooled, clean with a soft cloth. Do not use chemical cleaners.
5. Correct Disposal of this Product
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
6. Glossary of marking symbols